After the hot summer here in Portland it was time to get the tub running again in preparation for the winter, but alas leaks occurred and then no power. After replacing the leaked PVC and filing up the tub and flipping the breaker, the hot tub doesn't want to heat up. The leaks were on the opposite side of the control panel, so water damage shouldn't be an issue. The GFCI in the control panel box has power, and when opening the panel and pushing on the Jets relay, they become active. From what I can take from it the toggle to activate the heat and the jets dont seem to be making the proper connection. Does anyone have any ideas, I seemed to of come to a standstill. Help me get this thing running before the rain hits