HotTubWorks Spa Repair Forums
Welcome to the HotTubWorks Spa Repair Forums.
- Everything For Hot Tubs & Spas
- Spa Parts, Repair and Troubleshooting
- 2000/01 sweetwater bahia works correctly for 10 hours then overheats.
Results 1 to 6 of 6
02-15-2012, 03:53 PM #1
temp displaying higher temp than water feels. was on 104, felt like 80. shut off brkr 4 10 mins, seemed ok. ck about 10 hrs later, says 112/oh. shut off brkr 4 10 hours.turn brkr on, temp shows 93. set to 102. 8 hrs later, 117/oh. shut off brkr. 10 mins, 100 degrees. ck w/thermometer, says 102. ck lite, pumps, seem good. reset temp to 102. rmvd filter, jets run better on heat mode. ck 1 hour later, good. 12 hours later ck agian. get - - - code. turn off brkr. rpld fltr w/fresh one. 8 hours later turn on brkr. diplay says 97. ck w/thermometer, says 100 . ck 1 hour later display says 100. whats wrong? all help apperciated.
02-15-2012, 04:36 PM #2
Usually when the water temperature does not match what the actual temperature of the water is in the spa it is the temperature sensor.
Last edited by MaryH; 02-15-2012 at 04:41 PM.
03-04-2012, 04:37 PM #3
03-05-2012, 08:42 AM #4
Yes it is the one mounted by the filter. It shoud be part number 6600-166.
03-22-2012, 02:55 PM #5
thank u MARYH. i changed the sensor, now my hottubs functional agian. thk u vry mch, crow3051.
03-22-2012, 03:01 PM #6
You are welcome, glad to hear it is working again.
All times are GMT -7. The time now is 11:19 AM.