HotTubWorks Spa Repair Forums
Welcome to the HotTubWorks Spa Repair Forums.
- Everything For Hot Tubs & Spas
- Spa Parts, Repair and Troubleshooting
- Balboa CS7000 Circuit Board/Pump
Results 1 to 1 of 1
Thread: Balboa CS7000 Circuit Board/Pump
01-28-2012, 11:01 AM #1
I have a Cal Spa with a Balboa CS7000 pc board. Yesterday I was in the spa and it shut down tripping the breaker. I reset the breaker and the startup was normal all the way to the pump starting to run. I then pushed the speed button and it kicked the breaker again. I went through the same process of resetting and it never tested the pump and the pumps will not run. All indicators are lit and the ozoninator can be cycled on but the pumps remain dormant. I did check the main fuses but am not sure where to go from here.
All times are GMT -7. The time now is 03:56 PM.