HotTubWorks Spa Repair Forums
Welcome to the HotTubWorks Spa Repair Forums.
- Everything For Hot Tubs & Spas
- Spa Parts, Repair and Troubleshooting
- holding 99 but running constantly and not heating
Results 1 to 3 of 3
11-27-2011, 08:42 AM #1
cal spa 2100 , i drained and fefilled the tub, restarted at the breaker but the unit will only hold 99 degrees. the heat element light does not come on and i had filled it with hot tap water. I have set the heat to 102 and do not have it in economy. is there a heater reset button on the pump?
11-28-2011, 08:10 AM #2
There may be some air trapped in the pump since you just drained and refilled. You can try slightly loosening up the pump union nut just to allow a small amount of water to trickle out, this will usually allow the air to escape if this is the case.
12-12-2011, 07:03 PM #3Junior Member
- Join Date
- Dec 2011
- Livonia, MI
how about the pressure switch? I had this problem and I had to replace the pressure switch.
All times are GMT -7. The time now is 04:40 PM.