HotTubWorks Spa Repair Forums
Welcome to the HotTubWorks Spa Repair Forums.
- Everything For Hot Tubs & Spas
- Spa Parts, Repair and Troubleshooting
- No power to hot tub, GFI keeps tripping
Results 1 to 2 of 2
07-18-2011, 08:14 PM #1
My hot tub has given me flawless preformance for about 4 years. however today, there was no indications on the display and the water was only slightly warm.
Testing the power, the GFIC was tripped, and trips instantly when the breaker is reset. I removed the wires from the control box and reapplied power, all is well. good power levels.
unplugged pump motors, lights and other accessories from the controller and still the GFCI trips.
I then noticed water accumulated around one terminal of the heater!
not much, but certainly noticable, where as the other terminal was dry.
Could this be causing the GCFI trip problem?
The controler is a Balboa 460 Mach 3, and looks like a Balboa heater as well. Can this leak be serviced, or do I need to purchase a new element, or whole heater unit?
07-19-2011, 09:10 AM #2
All times are GMT -7. The time now is 06:44 AM.