HotTubWorks Spa Repair Forums
Welcome to the HotTubWorks Spa Repair Forums.
Turk videolari arasinda en erotik sahnelerin bulundugu donmadan Full Porno izle adresi olarak bilinen Adult Porn sizlerle onerimizdir.
Results 1 to 2 of 2
Thread: Gfi trip. Balboa 54585
01-19-2014, 02:02 PM #1
Gfi tripped. Disconnect power leads from tub and gfi is fine. The terminal block on the control board reads dead short between white(neutral) and black (hot). I disconnected each component...pumps, blower, ozone, heater with no change. Dead short (continuity) on balboa control board main terminal block white to black with no external power wires connected. Can this be anything other than bad control board
01-20-2014, 06:37 AM #2
If you have both leads to the heater disconnected and not just one and all other outbound components disconnected it is most likely the circuit board causing it. You may even have a burn mark on the back of the board at TB1.
All times are GMT -7. The time now is 11:23 AM.