HotTubWorks Spa Repair Forums
Welcome to the HotTubWorks Spa Repair Forums.
Turk videolari arasinda en erotik sahnelerin bulundugu donmadan Full Porno izle adresi olarak bilinen xporno sizlerle onerimizdir.
Results 1 to 2 of 2
01-23-2011, 08:31 AM #1Junior Member
- Join Date
- Jan 2011
- North Jersey
I purchased the CVR-RSQ-RHT Spa Cover at the end of 2009. I noticed last night the cover was raised on the two ends. I used the clips, which were tight when I connected them last night. I had to lean on the cover to get the clip connected. I noticed this morning the ends were approximately 1/2" up off the tub. The temperature overnight went down to 0 deg. I'm thinking the foam or vinyl contracted in the cold and lifted. I will probably resort to using rope to tie the cover down. I did check for obstructions such as ice under the cover. I use the tub about 3 times a week. Our temperatures have averaged 25 deg at night until this weekend. We have had snow almost weekly since Christmas.
01-26-2011, 10:05 AM #2
Do you have the order number for this spa cover so we can review the cover selected to determine what is causing this?
Last edited by MaryH; 02-23-2011 at 11:05 AM.
Tags for this Thread
All times are GMT -7. The time now is 04:20 PM.