Living the Home Spa Life
Shopping Cart
Results 1 to 6 of 6
Thread: Pump problem?
-
08-09-2009, 12:04 PM #1Guest
We have an older Quantum X Spadition. Replaced the pump last year. Storm blew out cable, internet, etc....seems also the hot tub. We can bypass the circuit board & get the pump to run, so don't think it's the pump. Is there something on the circuit board we can check or replace? Hot tub will not run at all. Help!
-
08-11-2009, 08:22 PM #2Moderator
- Join Date
- Apr 2009
- Posts
- 179
If you are getting proper power to the spa then the first thing I would check would be the system fuses.
-
08-12-2009, 12:30 PM #3Guest
Where are the fuses located?
-
08-12-2009, 04:12 PM #4Moderator
- Join Date
- Apr 2009
- Posts
- 179
They should be located inside the control box in the equipment area of the spa. There should be a system fuse that may be a 20 or 30 amp fuse. If that has blown nothing will work on the spa. Are you getting any kind of indicator lights on the top side panel?
-
08-12-2009, 05:15 PM #5Guest
In the older Quantum Expedition there is no digital readout panel & no lights. Equipment is accessible through a lower panel & only looks like a pump & circuit board enclosed in a box. The hot tub is heated with heat stick. I'm not sure if there are fuses on that circuit board that are replaceable. Maybe they just don't look like regular fuses?
-
08-17-2009, 07:54 PM #6Moderator
- Join Date
- Apr 2009
- Posts
- 179
If there are not any replacable fuses and you are getting proper power to the spa I am leaning towards the spa circuit board as being the problem.
Reply With Quote
