HotTubWorks Spa Repair Forums
Welcome to the HotTubWorks Spa Repair Forums.
Turk videolari arasinda en erotik sahnelerin bulundugu donmadan Full Porno izle adresi olarak bilinen xporno sizlerle onerimizdir.
Results 1 to 5 of 5
Thread: Jet Replacement
07-28-2009, 08:59 PM #1
We inherited a Coleman Horizon 400 series spa. How do I go about replacing/repairing a jet? What kind of tool do I need? Also a flexible plastic elbow from underneath leading to a small jet in the foot massage area?
07-31-2009, 04:41 PM #2
Jets that would require a spa jet tool would have a jet back that the wall fitting screws into it from inside the spa. These type of jets usually have some holes or slots that a tool would fit into to unthread the wall fitting from the jet back. Other jets that would not require a tool to remove would have a wall fitting that slips through the hole of the spa and attached with a nut on the back. This are easily removed by cutting the nut (if the spa is foam filled) and removing the wall fitting. If you would like to email me digital pictures of the jets as well as the flexible elbow I can help determine which you have.
08-02-2009, 05:49 PM #3
08-02-2009, 05:53 PM #4
08-03-2009, 08:18 PM #5
Thanks! this is good to know!
All times are GMT -7. The time now is 10:36 PM.