HotTubWorks Spa Repair Forums
Welcome to the HotTubWorks Spa Repair Forums.
Results 1 to 3 of 3
04-15-2009, 06:00 AM #1
Some years ago Watkins discontinued the No Fault heaters made of plastic. If you have a 95-2000 Hot Springs and you heater goes out --you have only the one choice. The new PDR unit --see the web site - these can be retro fitted into any of the earlier Hot Springs and Tiger River spas . You should consider changing the thermistors as well --there are two. If you have a 95 or 96 model year you may also want the install kit as it has tubing and electrical connection you will find handy. We generally stock the 6kw model because it can be used on the 120v spas as well .
If your facing this upgrade we have done dozens and dozens of these -we can help you dont panic its not that bad.
e-mail me email@example.com
03-05-2011, 09:20 AM #2Junior Member
- Join Date
- Mar 2011
- Texas Hill Country
Marc, I have a Hot Springs Grandee bought in '07. For the past year our electrical trip switch has been tripping. We drained the tub, removed the heater & cleaned it a few months ago, but it continued tripping. We could nudge the heater to increase temps by a few degrees but would usually have to reset the tripped switch. Since last week we have been unable to set the heater at all, but the electrical switch is not being tripped. I think we need a new heater. What do you think.If You Don't Stand For Something,
You'll Fall For Anything!
03-07-2011, 11:19 AM #3
All times are GMT -7. The time now is 09:13 PM.