HotTubWorks Spa Repair Forums
Welcome to the HotTubWorks Spa Repair Forums.
Results 1 to 2 of 2
Thread: dr code
05-05-2013, 02:47 PM #1
I have a 2003 Bullfrog spa. I replaced the heater element. Now I get a dr code. The pump is pumping well I have removed the filter but still no luck. I read that there can be an air lock but can't find how to fix. Any suggestions? Thanks!
05-06-2013, 04:56 PM #2
If you just slightly loosen the pump union nut just enough to allow water to trickle out for a little bit it will release any air that could be trapped in the pump. Then tighten back up and run to see if it improves.
All times are GMT -7. The time now is 06:10 PM.