voultar
03-11-2012, 01:59 PM
Hey guys,
I'm troubleshooting our 10 year old Great Lakes Spa. It's equipped with a Balboa-Pack and a 2 speed Sav-Rite Durajet Motor/Pump.
Here is what's happening..
When you plug the Spa in. Everything seems to be fine, no error-codes on the LCD. You hear the Relay Click to engage the Low-Speed/Thermo Circuit. But nothing happens. If you press the Jet button to engage the high-speed, I hear a click, but nothing happens.
I've tested voltage on both low and high-speed relays and all is good. I have checked voltage on the motor (High/Low speed Connectors) and all is good.
Here is the interesting thing. When press the Jet button to engage the high-speed, it doesn't come on. But, if you push the contactor in, the motor starts and it engages perfectly fine. So basically, the high-speed will only work if you push the contactor in. When it's running, if you press the jet button to go back to the low-speed, it cuts out. Nothing.
Does this sound like a motor issue even though High-Speed engages when pushing in the contactor on the end of the motor? I'm so confused by this.
Thanks for all reads and insight!
I'm troubleshooting our 10 year old Great Lakes Spa. It's equipped with a Balboa-Pack and a 2 speed Sav-Rite Durajet Motor/Pump.
Here is what's happening..
When you plug the Spa in. Everything seems to be fine, no error-codes on the LCD. You hear the Relay Click to engage the Low-Speed/Thermo Circuit. But nothing happens. If you press the Jet button to engage the high-speed, I hear a click, but nothing happens.
I've tested voltage on both low and high-speed relays and all is good. I have checked voltage on the motor (High/Low speed Connectors) and all is good.
Here is the interesting thing. When press the Jet button to engage the high-speed, it doesn't come on. But, if you push the contactor in, the motor starts and it engages perfectly fine. So basically, the high-speed will only work if you push the contactor in. When it's running, if you press the jet button to go back to the low-speed, it cuts out. Nothing.
Does this sound like a motor issue even though High-Speed engages when pushing in the contactor on the end of the motor? I'm so confused by this.
Thanks for all reads and insight!