alexhg
11-27-2011, 07:42 AM
cal spa 2100 , i drained and fefilled the tub, restarted at the breaker but the unit will only hold 99 degrees. the heat element light does not come on and i had filled it with hot tap water. I have set the heat to 102 and do not have it in economy. is there a heater reset button on the pump?
MaryH
11-28-2011, 07:10 AM
There may be some air trapped in the pump since you just drained and refilled. You can try slightly loosening up the pump union nut just to allow a small amount of water to trickle out, this will usually allow the air to escape if this is the case.
annahale
12-12-2011, 06:03 PM
how about the pressure switch? I had this problem and I had to replace the pressure switch.