wallawd
11-21-2010, 08:04 AM
We have changed the two pleated filters with new ones, but the flashing error code continues. We have drained and checked the exteriors of the foot well filters. The spa heats, the pumps work, all of the jets move water and the diverters are open so as to allow all of the jets to receive water. We did have FLO code flashing as well, but that has stopped after restarting spa.
How can we determine what the problem is and how to fix it.
MaryH
11-22-2010, 09:17 AM
This is a programable feature that you can set for how many days you would like to go before cleaning or replacing filter, for example it can be programmed for 0,10,20, etc. up to 120 days or off. It doesn't affect spa usage but must be reset after cleaning or replacing filter. To program and reset the message you press the cycle button six times. The display should read "FIL". Then press the select button one time, it should show what is currently programmed for the duration or the days since last filter cleaning. Then you press the up or down button to change the duration. Lastely press the display button to save changes and reset message.