I am trying to replace the light in my Jacuzzi J325 Rainbow Waterfall. I can't figure out how to disassemble the waterfall to get to the light. Can anyone explain to me how to take the waterfall apart?
In order to get to the light you need to remove the waterfall assembly. To do this you first you need to remove the wood or synthetic skirt just under the waterfall. They should not have foam filled the area where the waterfall is plumbed allowing you to access it but there may be some that may need to be removed. You would then need to cut the plumbing, unscrew the nuts that hold the waterfall onto the spa. You should now be able to remove the waterfall assembly. Depending on when your spa was manufactured the light was either glued into place or it snaps in so it can be removed. If the light was glued in then you would need to replace the whole assembly.