Free Shipping on all Spa Covers and orders over $100 Spa Covers
1-800-770-0292
7am-7pm CST M-F
Sat. & Sun. 8-5

Posts Tagged ‘Spa Pumps’

Sundance Spa Pumps and Jacuzzi Pumps

June 3rd, 2011 by

Sundance Wet End

 

 

We are now offering a new line of wet-ends called the Piranha that have 8 mounting legs instead of the typical 4 leg style. This will allow you to clock the wet-end into 8 different positions including those 45 degree angles that Sundance and Jacuzzi brand spas used on their models for a number of years.

The wet end for this pump can be adjusted to all these positions, so you can more easily make a replacement to the volute of your spa pump. Reducing the number of 90′s is always a good idea for decreased resistance in your spa system.

Here’s the new offering of Sundance Spa Pumps

PirWE20

Complete Sundance Wet End for 4.0/ 2.0 Hp Pumps.
Contains: front and rear housing, 2.0 Hp impeller, o-ring, seal and screws.  For use on a 48 Frame Pump which Sundance used on 1998-2005.
Current Replacement Pump Wet End for these old part numbers: 6500-257, 6500-262, 6500-264, 6500-265, 6500-266, 6500-757, 6500-762, 6500-764, 6500-765, 6500-766, 6500-769, 6500-347, 6500-349.
Used on Sundance Spa Models: Altamar, Bahia, Calypso, Calypso II, Cameo, Certa, Chelsee, Hamilton, Hartford, Hawthorne, Majesta, Marin, Madison, Maxxus, Montego, Optima, Palermo, Telluride
Used on Jacuzzi Premium Spa Models: J-325, J-330, J-335, J-340, J-345, J-350, J-355, J-360, J-365, J-370, J-375, J-380, J-385

PirWE25

Complete Sundance Wet End for 4.2/ 2.5 Hp Pumps.
Contains: front and rear housing, 2.5 Hp impeller, o-ring, seal and screws.  For Use on a 48 Frame Pump which Sundance used on 1998-2005.
Current Replacement pump wet end for these old part numbers: 6500-254, 6500-257, 6500-260, 6500-261, 6500-262, 6500-263, 6500-264, 6500-265, 6500-268, 6500-754, 6500-757, 6500-760, 6500-761, 6500-762, 6500-764, 6500-765, 6500-768

Used on Sundance Spa Models from 1998-2005: Altamar, Austin, Bahia, Burlington, Calypso, Calypso I, Calypso II, Cameo, Camden, Capri, Caprio ST, Cayman, Certa, Corum, Cyprus, Hamilton, Hartford, Hawthorne, Madison, Marin, Majesta, Maxxus, Montego, Olympia, Optima, Palermo, Rio, Telluride.

Used on Jacuzzi Premium Spa Models: J-325, J-330, J-335, J-340, J-345, J-350, J-355, J-360, J-365, J-370, J-375, J-380, J-385

PirWE15

Complete Sundance Wet End for 1.5 Hp Pumps.
Contains: front and rear housing, 1.5 Hp impeller, o-ring, seal and screws. For use on a 48 Frame Pump which Sundance used on 1998-2005.
Current Replacement pump wet end for these old part numbers: 6500-122, 6500-135, 6500-259, 6500-258, 6500-293, 6500-759, 6500-758, 6500-793, 6500-345

BN50-15-PIR
6500-345, Sundance Spas Pump, 1.5 HP, 120 Volt 2 Speed. 1997-Present

Current Replacement for these old part numbers: 6500-122, 6500-135, 6500-259, 6500-258, 6500-293, 6500-758, 6500-759, 6500-793.
Used on Sundance Spa Models: Aspen, Bali, Cheyenne, Denali, Dover, Metro, Solo, Suntub, Tango, Tacoma, Vail

BN62-25-PIR
6500-341 & 6500-355, Sundance Spas, Jacuzzi Spas Pump. 2.5/4.2 HP Rated, 240 Volt, Replacement Pump for 1997-Present Sundance Spas and Jacuzzi Premium Spas.

Used to Replace: old part numbers: 6500-126, 6500-128, 6500-131, 6500-254, 6500-261, 6500-263, 6500-266, 6500-269, 6500-754, 6500-763, 6500-766, 6500-769
Used on SUndance Spa Models 1997-2011: Altamar, Bahia, Calypso, Calypso II, Cameo, Certa, Chelsee, Hamilton, Hartford, Hawthorne, Majesta, Marin, Madison, Maxxus, Montego, Optima, Palermo, Telluride
Used on Jacuzzi Premium Spa Models: J-325, J-330, J-335, J-340, J-345, J-350, J-355, J-360, J-365, J-370, J-375, J-380, J-385

Hot Tub Supplies Could be Tax Deductible

November 1st, 2010 by

According to the 502 publication of the IRS some medical costs can be deducted when filing income tax. In its opinion letter Index No.: 213.05-00, “Section 213(a) allows as a [tax] deduction the expenses paid during the taxable year for medical care of the taxpayer, spouse, or dependent. Under § 213(d)(1)(A), an expense is for ‘medical care’ if its primary purpose is the diagnosis, cure, mitigation, treatment, or prevention of disease.

If a medical professional has diagnosed a medical condition that can be cured or relieved with hydrotherapy or swimming, a consumer may be able to claim a hot tub purchase as a tax deduction. Because a hot tub or spa is of a particularly personal nature, the consumer must establish that a hot tub is primarily for the cure, mitigation, treatment, or prevention of disease before the cost can be deducted. ThermoSpas, a national hot tub manufacturer and retailer, encourages those suffering who may benefit physically or mentally from warm water therapy, to discuss the benefits of a hot tub or pool with a qualified medical care professional.

Capital improvement expenses can be deducted for the installation of special equipment in the home. The purpose of its installation should be for medical care of either the spouse or any of the dependents living in that home. Those improvements that increase the value of property can be included partially as medical expenses. If the improvements have absolutely no effect on property value the entire cost of installation can be considered as a medical expense. Consumers may need to have property appraised to determine if the value has or has not increased.

Consumers who have purchased a hot tub or spa for medical benefits to contact both medical and tax professionals before deducting the cost of the hot tub or any related equipment.

Read more: http://www.sfgate.com/cgi-bin/article.cgi?f=/g/a/2010/10/31/prwebprweb4723234.DTL#ixzz1445WWcUA

Spa Pump Crazy

September 20th, 2010 by

Five years ago we added spa pumps to the site.  It’s been one of those journeys that has come very slowly, not a silver bullet anywhere to be found.  We started with the best brands available, which was not an easy path due to most of the suppliers have been buying each other out.   When we started we just stocked spa pumps,  then we realized we need to test everyone because it was apparent our suppliers did not, then we even built a water test station, to make 100% sure we had great product before the client ever received theirspa pump.. We hired a friend and former colleague from the Sundance Spas engineering department to build our work stations and create the protocol to testing and assembly.   It was one of those projects that seemed not to make any sense on paper yet I knew we had to invest to be the best source online for spa pumps.

Sales have always been good yet it’s taken allot of energy with very little profit, since spa pumps are heavy to ship and the warranty costs seem to never get covered by the supplier.  We have always been liberal with our return policy as if we were the buyers ourselves.   The spa pumps just always seemed to be needing more work.  So one more time, a couple all stars here jumped in and got deep into the project.

Jim and Brian,  spent months researching, studying everything they could to figure out what we needed for our clients, how to source correctly, engineering, how to create the best value for our clients, and how to make it easy to find the right spa pump.  They as always did us proud and our clients right by creating the most complete offering of spa pumps at the best values, and a method so clients can get through the challenge of knowing what they need.   They even made spa pump videos.

So my hat is off to these guys who come to work everyday and care about what they do for us and for you.  It’s an inspiring group.