Free Shipping on all Spa Covers and orders over $100 Spa Covers
1-800-770-0292
7am-7pm CST M-F
Sat. & Sun. 8-5

Posts Tagged ‘Hot Tub Ozone’

Troubleshooting a Spa Ozonator Problem

March 27th, 2013 by

ozone-2Ozone is one of the world’s strongest sanitizers. It eliminates 99.9% of bacteria and other pathogens in your spa water. It also attacks oils, dirt and nearly all contaminants. And, the only byproduct of Ozone (O3) is Oxygen (O2).

Using a spa ozonator can reduce your chemical usage dramatically, which is why most new spas are equipped with an ozonation system.

But you may be wondering if your ozonator is working? You probably don’t have a test kit for ozone, and even if you see bubbles coming out into the spa, there may be a problem.

How Does Spa Ozone Work?

In spas and hot tubs, ozone is produced by a Ultra-Violet bulb. When air is exposed to UV radiation (from a UV light bulb), some of the oxygen in the air is converted to ozone. O2 gains a third oxygen atom, and becomes O3. When the ozone molecule attacks contaminants in your spa water, it gives up the third atom, and reverts back to O2.

Inspect the UV bulb

If you can see the blue light coming from an inspection port, or slipping out of a small crack in the housing, you can assume that the bulb is functioning properly. If there is no blue light, follow the power cord, and make sure that it’s securely plugged into the spa pack, or is connected to a power source. Inspect the cord also, looking for problems such as cuts or breaks in the wire harness. Finally, if the bulb is lit, and no ozone is being released, you may have a clogged venturi injector.

Inspect the Ozone Hose

The hose carries the small ozone bubbles from the spa ozonator to the venturi injector, which pulls the ozone into the spa plumbing. Sanitation takes place almost immediately. If the hose is broken, or crimped, or disconnected, you have located your ozonator problem.

Inspect the Check Valve

On the hose, there is a check valve, which allows the ozone to flow in only one direction (towards the spa jets) and keeps water out of the ozonator. If the check valve appears to be damaged, or stuck, or if you notice that the pump basket is filling with air when turned off, you may have a faulty check valve. Be sure to replace with your exact manufacturer replacement. one that won’t be damaged by ozone, and is made to match the ozone output pressure.

Ozone bulbs usually last 3-5 years. When replacing the ozone bulb, be sure to use the exact manufacturer replacement. Or, you can replace the entire spa ozonator.

 

Happy Hot Tubbin’!

Daniel Lara
Hottubworks.com

 

Installing a Spa or Hot Tub Ozone Injector

March 18th, 2011 by

One of the greatest items to ever come out for a hot tub has to be a spa ozonator. They have the ability to kill the majority of the bacteria in the water as well as significantly reduce the amount of other chemicals that have to be used in the water. The only problem is that it is very difficult to disperse the O3 gas into the system if you aren’t pre plumbed for ozone.

We were getting so many calls for this that we actually built a spa ozone injector kit that will allow the ozone to be injected into the water in a way that is even more effective than if your spa was actually pre plumbed for ozone. If you have 1.5 plumbing you would use part # HTW-OIM15 and if you have 2 inch plumbing you would use part # HTW-OIM2.

To install the spa injector kit, locate a length of pipe AFTER the filter and heater where you install the manifold in an upright position, as shown below. It measures approximately 15″ long and 5″ tall, so you need a clear section of pipe that’s around 16″ that you can cut into. In cases where there is no room, you may have to reroute the return line slightly, to create the space needed for the ozone manifold.ozone-injection-manifold

After locating a suitable location, all you do is cut the ozone venturi manifold (shown above) into your plumbing with a hacksaw. The pipe that is cut out should be about 3″ shorter than the overall length of the manifold, so the pipe will slip into both ends of the manifold, 1.5″ on each side.

Use pipe cleaner or primer and then glue the manifold in place with fresh PVC glue. Connect your new spa ozonator hose to the injector and you’re ready to go. The Ozonator unit should be mounted somewhere nearby, in reach of the ozone hose.

I get calls all the time where people are asking for an ozonator and they don’t even realize that it has to be pre plumbed and you could hear the defeat in their voice when I ask. But then when I tell them we have a device that will allow them to use the ozonator you could hear them perk up again. It’s a good feeling to know that we could help people find what they are looking for when they don’t even know they needed it.

So if you ever have any questions about ozone or the different ozone systems or injection manifolds that we have available – don’t hesitate to call, we at www.hottubworks.com are here to help you out.

~ Nicholas

 

Helping a Customer With a Rodent Issue

March 3rd, 2011 by

Mice in hot tubsIts crazy to think about just how many items there are on our site. Just the other day while helping a customer I discovered an item that I think would be helpful to a lot of people out there.

He was complaining that rodents were getting up in his equipment and eating through his wires. Mice underneath the spa. So not only did I help him find the replacement wires he needed but I helped him find an item that should help with his rodent problem as well.

The item is question is sku # 3-80-700-1000. The official name of it is the Mouse-Away Pouch. It is a little pouch with different types of essential oils that is supposed to repel rodents. The best thing about it is that it is poison free so it wont harm them or you.

Hopefully you don’t have any rodent issues but if you do I think that this item will really help!!  I was glad that I had previously discussed the item with our technician and that I was able to help a customer find a solution to their problem.

So remember, if you ever have any questions on any of the items on our site (there are a lot J) or need help solving a sticky situation with your hot tub we are always here to help.

~Nicholas

Bullfrog Spas Hires A Good Guy

February 28th, 2011 by
Bullfrog Spas and HotTubs New CEO

Friday night I was checking email and this press release came through. It’s a good match for the man and the company. I’m impressed that the founder was humble enough to bring in a person who knows more about building a dealer network than himself. So, I predict good things for Bullfrog spas

Hi-Tech Hot Tub Company Welcomes New CEO

Hot tub industry veteran, Jerry Pasley named Chief Executive Officer at Bullfrog Spas. Plans to lead innovative up-and-coming spa manufacturer to the next level.

New Bullfrog CEO – Jerry Pasley

Quote startIn making this decision, I was not concerned about what Bullfrog Spas is, or is not at the present time, but what it can become. I can see enormous potential at Bullfrog going into the future.Quote end

Salt Lake City, UT (Vocus/PRWEB) February 25, 2011

Bullfrog International, LC, is pleased to announce the hire of Jerry Pasley to the position of Chief Executive Officer. Mr. Pasley was formerly the Executive Vice President of Sales at Jacuzzi Hot Tubs and Sundance Spas.

Mr. Pasley will assume responsibility for the general leadership, sales direction, and day to day decisions at Bullfrog Spas. David Ludlow, former CEO, Founder, and the inventor of Bullfrog’s patented JetPak System, will remain with Bullfrog Spas as President and will focus on further Product Research and Development and Business Development. Ludlow welcomed the addition of Pasley to the executive team and, in fact, was instrumental in his acquisition.

Ludlow expressed his support and approval of this move: “Jerry Pasley is not only a seasoned pool and spa industry veteran, but more than that, he shares the vision of what Bullfrog can become and he has the ability and industry influence to propel Bullfrog into a leadership role in the marketplace.”

Mr. Pasley has nearly 30 years of experience in the hot tub industry, with a focus on sales management and sales strategy. He has served on the Association of Pool and Spa Professionals’ Hot Tub Council and has considerable experience in the development of retailer and distribution networks. He currently sits on the Board of Directors of the Association of Pool and Spa Professionals (APSP) as a Director at Large.

When asked about the decision to leave one of the major hot tub manufacturers in the industry, especially considering their history and recognizable brand, Mr. Pasley replied, “In making this decision, I was not concerned about what Bullfrog Spas is, or is not, at the present time but what it can become. I can see enormous potential at Bullfrog going into the future. The track record of impressive growth is already there and with their patented technology and quality Bullfrog will soon be an industry leader.”

Mr. Pasley’s goals for Bullfrog include securing solid financing plans for Bullfrog dealers and the establishment of enhanced sales and marketing programs to expand the influence of Bullfrog Spas and the JetPak System. Pasley commented on these plans, “I’m confident that we can explore and implement plans to allow dealers to show more spas. Along with the expansion of sales networks, this will simply allow many more people the chance to discover the unique benefits and the reliability that you get with a JetPak-powered Bullfrog Spa.”

Ozone and Minerals for Spas & Hot Tubs

February 17th, 2011 by

ozoneMineral Sanitizers (Nature2, Frog Floating System, Sundance Spas Sunpurity, Hot Spring AG Mineral Purifier) is offered as an alternative sanitation system for spas and pools, with promises of cleaner water without the drawbacks of chlorine. However, these Mineral Sanitizers recognize that they do not oxidize all the organics that a spa may contain, so it recommends using its product ‘Cense’ as the required oxidizer (a version of MSP, or monopersulfate).

We have nothing against MSP, but why not have the best oxidizer you can have, without adding ANY more chemicals? It’s not just DEL saying this. Here’s the assessment of freedrinkingwater.com:

What is Ozone for Spas?

“Ozone, fed into the water continuously by an Ozone generator, is the strongest oxidizer for pool [or spa] water treatment. …Ozone has a minimal effect on pH and water chemistry.”

The bottom line for spa and pool disinfection is that ozone is the strongest, broad-spectrum oxidizer that can be delivered simply and reliably. Ozone combines well with Mineral Sanitizers (Nature2, Frog Floating System, Sundance Spas Sunpurity, Hot Spring AG Mineral Purifier) minerals to cover the gaps in sanitation left by Mineral Sanitizers alone.

What is a Mineral Sanitizer?

Mineral Sanitizers are a “mineral bed” that is installed in your spa circulation to deposit silver and copper ions into the water to kill bacteria and algae, respectively. This is distinct from ionizing systems because the minerals are deposited through the flow of water through a cartridge rather than an electrical ionization process. Mineral Sanitizers shares some benefits with Ozone in that neither of them relies on excessive use of chemicals like chlorine that can have harmful byproducts when used at high enough doses to be effective.

Is Ozone and a Mineral Sanitizer Your Best Option?

No disinfection system is perfect, but if your criteria are for a simple and effective disinfection routine that produces clean, fresh smelling water with minimal harmful byproducts, start with Ozone. Whether you choose to supplement it with Mineral Sanitizers (Nature2, Frog Floating System, Sundance Spas Sunpurity, Hot Spring AG Mineral Purifier) or a small residual level of chlorine, you will be able to maintain fresh, safe water in your spa.

We have traditionally recommended a strong Ozone system coupled with a small residual amount of chlorine (maintained at about 3 ppm for spas, depending on your typical usage) for a simple, low cost way to keep spa water pure. The chemicals and the tests they need are widely available and understood. But if a Mineral Sanitizer appeals to you, we know it can also work.

Thanks;

Jerry

New Hot Tub Research Finds New Benefits

December 15th, 2010 by

Numerous studies have examined the effects of water immersion temperatures on the cardiovascular system, but few have examined the effects of immersion temperature on factors relating to autonomic nervous system regulation (ANS).

Our research thus far has assessed aquatic immersion temperatures upon the cardiovascular system, peripheral circulation and core temperatures in a young college-aged group and a middle-aged group. We have found a number of important physiologic changes within the ANS that occur during immersion, with a striking decrease in sympathetic nervous system function during warm water immersion. Interestingly these changes are almost identical between age groups, with the older age group at higher baseline measurements.

These changes may well have beneficial public health implications for water use.

NASMI
Physical Education Building Room 101AA
PO Box 641410
Pullman, WA  99164-1410
Phone: 509-335-8226
Fax: 509-335-4594
aquatic.research@wsu.edu

Spa Ozone – Using Ozone in Spas & Hot Tubs

September 21st, 2010 by

ozone

Ozone is a great way to sanitize your spa or hot tub. It kills quickly and cleanly, with no byproducts – doesn’t affect water chemistry, and can be produced for just pennies per day!

Most new spas will have an ozonator, with lower end models offering it as an option. You can add a spa ozonator at any time to an existing spa. Ozone will reduce the bromine or chlorine needed, and give a noticeable shine and clarity to any spa or hot tub.

inventor of ozone christian-friedrich-schonbein

Ozone was discovered by German scientist Christian Friedrich Schönbein in the 1840s when he identified a unique odor during electrolysis and electrical sparking experiments. He recognized the scent as the same odor found after a lightening flash and named the substance ozone.

Ozone is created when oxygen molecules are split, by a high-energy electrical discharge, resulting in two individual oxygen atoms and those individual oxygen atoms unite with remaining oxygen molecules to produce a three-atom molecule of ozone.

The weak bond holding ozone’s third oxygen atom causes the molecule to be extremely unstable and thus, very effective as an oxidizer.

An oxidation reaction occurs upon any collision between an ozone molecule and an organic molecule, such as bacteria, viruses, fungus and algae, where the oxygen atom held by the weak bond splits off and only oxygen is left behind.

Ozone Benefits

  • It’s a natural purifier as no harmful chemical by-products are created during purification, making it environmentally friendly.
  • Eliminates chloramines, chlorine by-products that can cause skin irritations and illness, and their off-gas odor.
  • Oxidizes hydrogen sulfides, iron, manganese, arsenic and most chlorinated hydrocarbons found in water.

Ozone Facts

  • In 1906, the city of Nice, France built the first water purification plant to utilize ozone.
  • Safe for mammals and marine life, ozone is used in zoos and aquariums.
  • Ozone has been purifying bottled water since 1982.
  • Since 1984, all Olympic Games competition pools have been sanitized with ozone.
  • In 2001, the FDA allowed the use of ozone as a direct food additive and ozone can safely be used as on food equipment surfaces.
  • In the pool and spa industry, ozone has been used for more than 75 years as the most powerful oxidizer for a swimming pool or spa.

Want to learn more?  http://delozonespa.com/

del-spa-ozonator Spa EclipseDel MCD-50 ozonator for spas