Free Shipping on all Spa Covers and orders over $100
1-800-770-0292
Sunday - Saturday
7am - 7pm CST

Spa and Hot Tub Ozone Generators

August 10th, 2015 by

spa ozone bubblesBefore there was ozone, it’s amazing we kept spas clean. We drained them a lot. An ozonator generator can kill 99.99% of impurities in a spa or hot tub. There’s almost nothing it won’t kill.

Ozonators typically last about 2-3 years before needing a regeneration kit, or replacement. The new Spa Eclipse can last up to 5 years, and uses Del’s new Plasma Gap ozone generation technology.

Adding ozone to a portable or inground spa is a simple affair, with installation possible in under 10 minutes. Install ozone on your spa, to both purify the water and invigorate your senses.

Del Spa Eclipse

spa-eclipse-newThe New Spa Eclipse Next Generation Corona Discharge system is the new kid on the block and replaces all previous versions. Featuring DEL’s exclusive Advanced Plasma Gap technology, the newly engineered design is now equipped with Auto Voltage Sensing. Higher ozone output and longer life than other CD technology, the DEL Ozone Spa Eclipse is the ultimate solution for water treatment in spa applications. Considerably more energy efficient than UV ozone generators, the Spa Eclipse is lower in overall power consumption, heat generation and operating cost Includes Ozone supply tubing, check valve, mounting screws, installation manual, and water chemistry guide. For hot tubs up to 750 gallons.

Dimensions: 5”H x 3.4”W x 2.3”D, 1lb
Output: 50-70 mg/hr;
Power Consumption: 110V/220V = 10W

Del MCD-50

del-spa-mcd-50The Del MCD-50 is for spas or hot tubs that want higher ozone production for optimal water quality. MCD-50 is serviceable and reliable with the longest lifespan of any spa ozone generator on the market, typically running for five years. The MCD-50 has a 50 milligram/hour ozone output, and also uses less power than many larger spa ozone generators. Uses a ceramic tube Corona Discharge method to quickly produce ozone. Mounts to the inside of spa or hot tub panel. Includes 44 inch cord with 4-pin AMP plug; ozone supply tubing, check valve, mounting screws, installation manual, and water chemistry guide. UL Listed, for hot tubs up to 1000 gallons.

Dimensions: 8.6”H x 6.1”W x 2.8”D, 3.75 lb
Output: 50 mg/hr; 580 PPM; 2cfh
Power Consumption: 110V = 50mA, 6W / 220V = 35mA, 9W

Installation of a Del Spa Ozonator

del-ozone-installation-in-a-spa-or-hot-tubTo install a Del MCD-50 or Spa Eclipse in your spa, find a suitable mounting location on the inside cabinet, above the return line (after the pump and heater). Place it as high as possible on the underside of the spa cabinet.

The ozonator doesn’t have to be located directly above the injection point, but it should be within a few feet. If the unit is mounted above water level, the hose can run straight to the injector, but if installed below water level, loop the hose up above the water level on it’s way to the injector.ozone-injector

Most spas or hot tubs that area “Ozone Ready” have an ozone venturi manifold, or vacuum injection point already installed on the spa return line. For an older spa or wood hot tub adding an ozone generator, you can install an ozone injector to your return hose. Just cut the hose and push it over the barbed ends of the injector, and connect the hose to the injector fitting and tighten down the hose nut.

After mounting the unit, connect the ozone supply tubing and connect the 4-pin AMP plug to the ozone (or accessory) port on your spa pak controller.

OZONE-MOLECULEOzone is the world’s most powerful sanitizer. Adding it to your spa can help ensure a bacteria-free hot tub or spa. If you have any questions on how to add an ozonator for hot tub or spa, give us a call – we have spa techs standing by!

 

Daniel Lara
Hot Tub Works

 

Tags: ,

Comments are closed.