Comments on: Titanium Heater Elements and Ozone Seals

By: Your Questions About Best Hot Tub Chemicals | SpaFanatic.com

Your Questions About Best Hot Tub Chemicals | SpaFanatic.com — Mon, 27 Feb 2012 09:32:00 +0000

[...] hot tub, the amount of chemicals we used dropped by about 1/3. Good luck.Powered by Yahoo! AnswersLisa asks…What chemical(s) or cleaning agent(s) work best when cleaning the tub portion of a hot t… the tub portion of a hot tub?I figure there isn't much I can't or shouldn't use seeing as the thing [...]

By: Portland Dryer Vent Cleaning

Portland Dryer Vent Cleaning — Fri, 09 Sep 2011 12:26:29 +0000

Portland Air Duct Cleaning…

[...]Ozone and Salt Water Systems for Spas and Hot Tubs | HotTubWorks Blog[...]…

By: Jack Stone

Jack Stone — Tue, 10 May 2011 19:19:06 +0000

Thanks for the feedback. We like your site too.

By: Amanda

Amanda — Tue, 10 May 2011 19:10:18 +0000

Great information. I really appreciate the information!

By: Jerry

Jerry — Tue, 19 Apr 2011 16:29:01 +0000

Thanks for insightful post. We agree with your comment ” mineral sanitizer primarily activated by a tiny dichlor amount, (hot tub chlorine) and then maintained it so by using oxidizing shock, which is NOT CHLORINE to keep the mineral sanitizer activated and working;” as being the best choice of methods for a hot tub. Pools are much better suited for a Salt System due to volume of water and temp of water.

Again, thank you for the smart and insightful comment.

By: hometown PnS (CLARION)

hometown PnS (CLARION) — Tue, 19 Apr 2011 16:18:52 +0000

Yes, the Nacl water can be corrosive. If you are shopping for a salt system. You pay for what you get, so if you find one that is ridiculously cheap or visa versa to others in comparison, make sure you ask for the Salinity Comparison or just look how much Nacl (salt in) converted to HOCl (chlorine out) in PPM (parts per million).. The ocean is around 35,000 ppm. The human taste sense can detect salt of about 5,000 ppm. And remember with good salt generators you shouldnt be tasting salt when swimming or lounging in water protected by a salt system. Which is a highly common misconception. so look and see how many ppm there is being converted. A good one will be around 1500 -2500 ppm on average.. no lower than 1500ppm though. So if you do have sensitive skin, and cant use my mineral sanitizer primarily activated by a tiny dichlor amount, (hot tub chlorine) and then maintained it so by using oxidizing shock, which is NOT CHLORINE to keep the mineral sanitizer activated and working; THEN, i highly reccomend shopping around for the right salt system for you.

By: Nick

Nick — Thu, 31 Mar 2011 20:03:23 +0000

I never realized that the ozonators cause the heaters to deteriorate at a quicker pace. Thank you for the information, I will definently use it to help customers in the future understand the issues they are having with their spas and help them resolve heater issues in the future.

By: Jerry

Jerry — Mon, 14 Mar 2011 22:37:22 +0000

Bonnie-

I have a hunch you may already know this….

In the past all salt water hot tubs have failed. Sundance Spas and Bioquest ( a company which sole purpose was to sell these systems) both failed after years and many thousands of dollars. The new systems today may work, it’s too early to judge. We have seen some heater failure already and hence we are suggesting a Titanium Heater which will not fail from corrosive salt water.

Hope this helps.

By: Bonnie B

Bonnie B — Mon, 14 Mar 2011 22:21:46 +0000

I heard salt water hot tubs are difficult to maintain and often break. Is there a way to prevent this?

By: Fish & Tank Care : Types of Fish | Taking care of your pet

Fish & Tank Care : Types of Fish | Taking care of your pet — Mon, 14 Mar 2011 00:55:01 +0000

[...] Ozone and Salt Water Spas « HotTubWorks Blog [...]