Dimension A: inches
Dimension B: inches
Dimension C: inches How do I measure this?

Please contact us before ordering if your cover:

• Measures over 96" in any dimension
• Has cut-outs for a control panel, speakers or handles.
• Is not completely flat on the bottom.
• Has more than 2 panels.
• Is shipping to Alaska, Hawaii or any off shore island.
• Is on a Hot Spring Spa with a cover lift which arms install/mount directly into the cover.

Cover Skirt Length: (Enter a length in inches.)
Please measure the skirt from the bottom of the cover down as shown. Enter a length in inches. Minimum length is 1.5". For no skirt, enter "NA".    Notes on Cover Skirt Length

Safety Strap Length:  (Enter a length in inches, not including the clip.)
The safety strap is measured from the bottom of the cover down as shown. Please include the skirt length but not the clip. The strap must hang at least 1.5" below the skirt. Please note: due to original production variations, it is not possible to guarantee matching strap placement. All hardware is included. 7" straps will be used if no length is entered.    Notes on Cover Safety Straps

Select Your Options

SELECT YOUR FOAM INSULATION
Your HotTubWorks Better Spa Cover uses super-insulating virgin foam core and contains no ozone depleting CFC or HCFC. You can choose from four options:

Our Economy 1.0 lb. foam cover is ultra lightweight, has a 4"-2" taper and is best for indoors. Approx. R-value: 12. One year warranty. Economy pricing: $299.99 delivered.

---

Our Standard 1.5 lb foam cover is good for mild to moderate climates and exceeds the ATSM standards for strength and safety. 5 Year Warranty. ADD $30

---

Our Deluxe 2.0lb foam model is denser and therefore less likely to absorb moisture. It provides half again the strength of our Economy foam along with additional insulation qualities (Approx. R-Value: 14.5). This cover is ideal for not only snowy climates as it supports up to 500 lbs of static snow weight but is also beneficial for moderate climates as it will reduce your heat loss and save you money in energy. This cover is also safer if you have small children or perhaps a dog that likes to snooze on top of your spa. ADD $50

---

Our Ultra insulation is both super-energy efficient and water resistant. This cover is formulated for heavy loads as it is constructed with a generous 6" to 4" taper. It is beneficial not only in areas with severe weather conditions (supports up to 1000 lbs of static snow weight) but ANYWHERE energy savings are a concern (you don't have to be in a cold climate to save a bundle on energy). With an R-Value of 24, this spa lid is one of the highest energy efficient spa covers on the market. As an added bonus, the Ultra comes FREE with the continuous heat seal and reinforced center hinge. ADD $165.

---

"The Works" is the best cover we have ever designed. With maximum energy efficiency, strength and longevity this cover goes a long step further than our Ultra. It is stronger (supports up to 1400 lbs of static snow weight), reduces utility expense (R-Value exceeding 30) and will outlast any cover on the market today (highest foam density + maximum foam thickness = longer life span). This cover features wind rated security straps and a vacuum sealed and welded double wrap vapor shield (12 mil thick) and a heat seal with reinforced hinge. This may be our most expensive cover however if you factor in your energy cost over just five years (the length of our non-prorated warranty) this becomes the least expensive and most effective cover you can invest in. ADD $300.

---

Heavy-Duty Windstraps: Reinforced straps with layers of scrim double-sewn inside the skirt and inside the side panel. Double-sewn to the spa cover. Ideal for windy climates.
No     Yes ADD $38     included with "The Works" cover at no extra charge (see above)



Continuous Heat Seal: A popular option for colder climates, this seal runs the entire length of the fold and virtually eliminates heat loss through the hinge.
No     Yes ADD $25     Yes, include this with my Ultra or "The Works" cover insulation at no extra charge (see above)




Double-Wrapped Core: Get extra moisture protection with TWO layers of heat sealed 6 mil polyethylene sheeting. If you've ever been stuck with a soggy cover, this is the option for you. It can add even more years to the life of your cover!
No     Yes ADD $28     included with "The Works" cover at no extra charge (see above)

Delivery

Our covers ship free to commercial and residential addresses in the United Sates.
Important Exceptions: Please contact us if you live in Alaska, Hawaii or on any offshore island. Sorry, no shipments outside the U.S.

If you wish to order more than one spa cover, please contact us.

Important! Please Read: Spa Cover Production, Delivery and Return Policies